SAE65
ASTM B505, SAE65, SAE J461, SAE J462
- Industrial
Typical Uses
Industrial
Bearings, Worm Wheels, Gears, Bearings for Heavy Loads and Relatively Low Speeds, Restaura Equipment, Gear Boxes, Speed Reducers, Valve Bodies, Worm Gears
SAE65
Typical Uses
Industrial
Bearings, Worm Wheels, Gears, Bearings for Heavy Loads and Relatively Low Speeds, Restaura Equipment, Gear Boxes, Speed Reducers, Valve Bodies, Worm Gears
מוטות עגולים : | 1/2″ – 11 3/4″ |
מוטות חלולים : | 1/2″X1″ – 10 1/2″X11 1/2″ |
מוטות משושים : | up to 3” |
מוטות מרובעים : | up to 5” |
מוטות מלבניים : | up to 11” W |
אורך מוט : | 10ft – 12ft |
Cu* | Al | Sb | Fe | Pb | Ni** | P | Si | S | Sn | Zn | |
Min/Max | 88.0-90.0 | 0.005 | 0.2 | 0.15 | 0.5 | 0.5 | 1.5 | 0.005 | 0.05 | 10.0-12.0 | 0.5 |
* In Determining Cu min, Cu may be calculated as Cu + Ni.
** Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min.
* ASTM B505
* SAE 65, SAE J461, SAE J462
Joining Technique | Suitability |
Soldering | Excellent |
Brazing | Good |
Oxyacetylene Welding | Fair |
Gas Shielded Arc Welding | Fair |
Coated Metal Arc Welding | Fair |
Machinability Rating | 20 |
Tensile Strength, minA | Yield Strength, at 0.5% Extension Under Load, minA | Elongation in 2 in. or 50 mm, min, % |
||
ksi | MPa | ksi | MPa | |
40 | 276 | 25 | 172 | 10 |
A Minimum tensile strength and yield strength shall be reduced 10% for cast bars having a cross section, thickness, diameter, or wall of 4 in. (102 mm) or more. The cross sections are the diameter of a round solid, the distance across the flats of a solid hexagon, the thickness of a rectangle, and the wall thickness of a tube.
US Customary | Metric | |
Melting Point – Liquidus | 1830 F | 999 C |
Melting Point – Solidus | 1528 F | 831 C |
Density | 0.317 lb/in3 at 68 F | 8.77 gm/cm3 at 20 C |
Specific Gravity | 8.77 | 8.77 |
Electrical Resistivity | 107.4 ohms-cmil/ft at 68 F | 17.86 microhm-cm at 20 C |
Electrical Conductivity | 10 %IACS at 68 F | 0.056 MegaSiemens/cm at 20 C |
Thermal Conductivity | 40.8 Btu · ft/(hr · ft2·°F) at 68 F | 70.6 W/m ·°K at 20 C |
Coefficient of Thermal Expansion | 10.2·10-6 per °F (68-392 F) | 18.4·10-6 per °C (20-200 C) |
Specific Heat Capacity | 0.09 Btu/lb/°F at 68 F | 377.1 J/kg · °K at 20 C |
Modulus of Elasticity in Tension | 15000 ksi | 103400 MPa |
Magnetic Permeability | 1.0 | 1.0 |