Demander d’ information

CuZn39Pb1Al-B

CuZn39Pb1Al-B

En1982

Typical Uses

Ingots : Large 80X80 mm
Ingots : Small 65X65 mm
La disponibilité des produits

CB754S

Chemical Composition

(%max, unless shown as range or min)

Cu** Ni P Mn Pb Sn Zn Al* Fe Si
Min/Max 58.0-62.0 1.0 0.02 0.5 0.5-2.4 1.0 Rem 0.10-0.8 0.7 0.05

 

NOTE 1 For special applications requiring fine-grained castings, the ingots may be ordered and supplied grain
refined to a maximum average grain diameter of 0,150 mm [see 5 i) and 6.4].
NOTE 2 The mechanical properties for pressure die castings (shown bracketed) are not mandatory requirements,
but are given for information only (see note 4 of 6.2).

* For ingots for the manufacture of sand castings or centrifugal castings, the aluminium content shall be restricted to
0,02 % max.
** Including nickel