FR
EN
HE
CuAl10Fe3Mn2
CuAl10Fe3Mn2
EN 12163, EN 12165, EN 12167
- Aerospace
- Plumbing
- Marin
- Industrial
Typical Uses
Demander d’ information
 Solides ronde : | 12mm – 100mm |
 Bar Length : | 3000mm |
 Bars hexagonales : | 10mm – 55mm |
 Bars carrés : | 20mm – 90mm |
 Bars & rectangle plat : | Up to 102mm W |
La disponibilité des produits
CW306G
Chemical Composition
(%max, unless shown as range or min)
| Cu | Al | Fe | Mn | Ni | Pb | Si | Sn | Zn | Others Total | |
| Min/Max | Rem | 9.0 – 11.0 | 2.0 – 4.0 | 1.5 – 3.5 | 1.0 | 0.05 | 0.2 | 0.1 | 0.5 | 0.2 |
Applicable Specifications
*BS EN 12163, BS EN 12165, BS EN 12167
Mechanical Properties
| Material Condition | Nominal Diameter or Width Across-Flats (mm) | Tensile Strength Rm N/mm2 min. | 0.2% Proof Strength Rp0.2 N/mm2 approx. | Elongation A % min. | Hardness HB | ||
| From | Up to and including | min. | max. | ||||
| M | 10 | 80 | As Manufactured | ||||
| R590 | 10 | 80 | 590 | (330) | 12 | — | — |
| H140 | 10 | 80 | — | — | — | 140 | 180 |
| R690 | 10 | 50 | 690 | (510) | 6 | — | — |
| H170 | 10 | 50 | — | — | — | 170 | — |
Rectangle (BS EN 12167)
| Material Condition | Rectangular bar thickness (mm) | Tensile Strength Rm N/mm2 min. | 0.2% Proof Strength Rp0.2 N/mm2 approx. | Elongation A % approx. | Hardness HB min. | |
| Over | Up to and Including | |||||
| M | All | As Munufactured | ||||
| R650 | — | 6 | 650 | (450) | (5) | — |
| H160 | — | 6 | — | — | — | 160 |
| R550 | 6 | 60 | 550 | (250) | (10) | — |
| H130 | 6 | 60 | — | — | — | 130 |