EN
HE
FR
CuZn35Pb2Al-B
CuZn35Pb2Al-B
En1982
Typical Uses
Request a Quote
|
|
Large 80X80 mm |
|
|
Small 65X65 mm |
Product availabillity
CB752S
Chemical Composition
(%max, unless shown as range or min)
| Cu | Ni | As | Mn | Pb | Sn | Zn | Al | Fe | Sb | Si | |
| Min/Max | 61.5-65.0 | 0.2 | 0.04-0.12 | 0.1 | 1.5-2.1 | 0.3 | Rem | 0.3-0.7 | 0.3 | 0.04-0.12 | 0.02 |
NOTE 1 The mechanical properties for pressure die castings (shown bracketed) are not mandatory requirements,
but are given for information only (see note 4 of 6.2).
NOTE 2 For special applications requiring fine-grained castings, the ingots may be ordered and supplied grain
refined to a maximum average grain diameter of 0,150 mm [see 5 i) and 6.4].
NOTE 3 For drinking water applications no other single element should be more than 0,02 %. The sum of these
single elements should not exceed 0,25 %.