Industrial Crank Shafts, Bearings, Bearing Plates, Machine Parts, Bushings, Applications Requiring Acid Resistance to Sulphite Fluids, Parts for Steel Mill Maintenance, Slide Guides for Steel Mills, High Speed, Heavy Load Bearings, Pumps, Pressure Tight Castings, Impellers, Corrosion Resistant Castings, Bushings for High Speed and Heavy Pressure.Marine Large Bearings for Ships, Builders Hardware Brackets, Fasteners Washers for Engines, Nuts
Bar Length :
10ft – 12ft
Bars carrés :
up to 5”
Barres creuses :
1/2″X1″ – 10 1/2″X11 1/2″
Solides ronde :
1/2″ – 11 3/4″
Bars hexagonales :
up to 3”
Bars & rectangle plat :
up to 11” W
La disponibilité des produits
C93700
Chemical Composition
(%max, unless shown as range or min)
Cu
AI
Sb
Fe
Ni
Pb
Si
S
Sn
Zn
p
Min/Max
79.0-82.0
0.005
0.50
0.70
0.50
8.0-11.0
0.005
0.08
9.0-11.0
0.8
1.5
Note: Cu + Sum of Named Elements, 99.0% min.
Applicable Specifications
* ASTM B505; SAE64
Fabrication Processes
* Continuous Casting
Fabrication Properties
Joining Technique
Suitabillity
Soldering
Good
Brazing
Good
Oxyacetylene Welding
Not recommended
Gas Shielded Arc Welding
Not recommended
Coated Metal Arc Welding
Not recommended
Machinabillity
80
Mechanical Properties (ASTM B505)
Tensile Strength, minA
Yield Strength, at 0.5% Extension Under Load, minA
Elongation in 2 in.
or 50 mm, min, %
ksi
MPa
ksi
MPa
35
241
20
138
6
* Minimum tensile strength and yield strength shall be reduced 10% for cast bars having a cross section, thickness, diameter, or wall of 4 in. (102 mm) or more. The cross sections are the diameter of a round solid, the distance across the flats of a solid hexagon, the thickness of a rectangle, and the wall thickness of a tube.
FR
EN
HE
